35.292.962�BIW 105.qxd 27/11/2004 13:32 P?gina 20
SymptomPossible causes
The machine vibrates when spinningThe internal packing has not been removed.
The machine is in contact with the wall or furniture.
The machine is not stable and level (check diagonally).
The washing load is badly distributed in the drum.
Maybe there is very little laundry in the drum.
The door will not openThe programme is still running.
Water in the tub: the door cannot be opened if water is present in the
tub.
Spinning starts late or the machineThe electronic balance control device has cut in because the laundry is
does not spinnot evenly distributed in the drum. The laundry is redistributed by
reverse rotation of the drum. This may happen several times before the
unbalance disappears and normal spinning can resume. If, after 10
minutes, the laundry is still not evenly distributed in the drum, the
machine will not spin. In this case, redistribute the load manually and
reselect the spin programme.
The machine makes an unusualThe machine is fitted with a type of motor which makes an unusual
noisenoise compared with other traditional motors. This new motor ensures
a softer start and more even distribution of the laundry in the drum
when spinning, as well as increased stability of the machine.
No water is visible in the drumMachines based on modern technology operate very economically
using very little water without affecting performance.
Before calling out an engineer, please ensure you have
Service & Spare Parts
read the details under the heading OSomething Not
In the event of your appliance requiring service, or ifWorking�.
you wish to purchase spare parts, please contact your
When you contact the Service Force Centre you will
local Bendix Service Force Centre by telephoning:
need to give the following details:
0870 5 9299291. Your name, address and post code
2. Your telephone number
Your telephone call will be automatically routed to the
3. Clear and concise details of fault
Service Force Centre covering your post code area.
4. The model and serial number of the appliance (found
For the address of your local Service Force Centre andon the rating plate - see picture).
further information about Service Force, please visit the
5. The purchase date
website at www.serviceforce.co.uk.
Please note that a valid purchase receipt or
For Customer Service in Ireland please contact us at the
guarantee documentation is required for in-
address below:
guarantee service calls
Bendix
Electrolux Group (Irl) LtdM..o...d......
Ser.
Long Mile Road
Dublin 12
Republic of Ireland
Tel: +353 (0)1 4090752
Email:
[email protected]
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042
20
ACEC
